Air-driven Hydro-test Power Packs

A variety of different configurations are available to generate pressures of up to 65,000 psi. Typically used for pressure-testing large diameter pipelines, hose umbilicals and wellhead control valves. Also used for chemical injection, pre-charging hydraulic accumulators and operating subsea valves.

Options are available for use with Nitrogen and other inert gases. There is also an option to have all of these products ATEX-approved.

 

TDA Pumps

  • Up to 21,600 psi
  • Typical applications include pressure testing of large i.d. pipelines, hose umbilicals, wellhead control valves, Chemical injection including methanol and glycol, pre-charging of hydraulic accumulators and the operation of Sub-Sea Valves
  • Can be used to pre-fill and pre-pressurise high pressure and high volume test systems
  • Ability to stall at predetermined pressure and hold at this pressure
  • Infinitely variable cycling speed and flow; reliable and easy to maintain
  • Dual seals between hydraulic and air sections with capture vent port as standard
 

TDA Power Packs

  • Fluid inlet strainer, air filter, regulator, lubricator, air pressure gauge & pump on/off valve
  • 6" diameter (150mm) panel-mounted pressure gauge
  • Pressure release valve, optional pressure isolation valve
  • Fully assembled with all interconnecting adaptors & pipework
 

L6 Power Pack

  • Typical applications include choke control operation, hydrostatic testing and press applications. It is used for sub-sea valve actuation, safety shutdown systems , wireline control systems and blow out preventer control systems
  • The L6 Series Power Pack is a self contained unit incorporating the proven SC Hydraulic, high flow, air operated hydraulic pump, available in a range of models up to 11,200 psi (772 Bar) and with varying flow rates up to 4.2 UK gallons per minute (19 litres)
  • 6" panel-mounted pressure gauge, pressure relief valve - supplied without a tank, but with tank options available
 

L10 Power Pack

  • Typical applications include choke control operation, hydrostatic testing and press applications. It is used for sub-sea valve actuation, safety shutdown systems and wireline control systems
  • The L10 Series Power Pack is a self contained unit incorporating the proven SC Hydraulic, double acting, air operated hydraulic pump, available in a range of models up to 25,000 psi (1724 Bar) and with varying flow rates up to 6.6 UK gallons per minute (30 litres)
  • 6" panel-mounted pressure gauge, pressure relief valve - supplied without a 5 Gallon tank, but with 20 Gallon tank option available
 

Compact Power Pack

  • Compact, self-contained unit
  • Typically available off-the-shelf or on short lead-times
  • Overall Dimensions:
    • 15" (38cm) long x
    • 15 1/2" (39.4cm) deep x
    • 17 1/4" (44cm) high
    • Option to have the product ATEX-approved
 

L3 Series Portapack

  • The SHS L3 Portapack has been designed with the offshore pressure testing market in mind.
  • Utilising an SC L3 Series air driven pump, this series has six ratios, of which the highest (-125) can reliably generate pressures up to a maximum of 15,500 psi (1068 bar) using either oil or water as the hydraulic medium
  • Operating air pressure varies from 15 psi (1.0 bar) to 125 psi (8.6 bar). Air drive consumption varies between 5-15 cubic feet per minute (0.14 - 0.43 m3/min)
  • The L3 Power Pack comes complete with a 1/4" BSPF air filter/ regulator, 63mm dia air pressure gauge, on/off air valve, a tough 1.1 gal (5 litre) plastic reservoir, integral suction strainer and filler/breather
 

Bolt-tensioning Power Packs

Air-driven Hydro-test Power Packs

Bespoke Pressure Equipment

Gas Boosters

HiP Valves

SC Pumps

Quality High Pressure Hoses

DK Lok

Accessories and Chart Recorders

Pressure Testing Facility

On-site service & support

Downloads

On-site Service & Support